|
Veetronix Siren Controller
With the instability of the weather and fire you need the reliability of a
Veetronix Siren Controller. Enclosed in it's NEMA 4 fiberglass weather resistant
case, the controller can with stand some of the harshest natural environments.
This system is an ideal choice for all siren control applications with its
versatility and affordability. The Siren Controller is available in VHF High
Band or UHF frequencies.
Veetronix has proven over the years that our communication equipment is some
of the best and most affordable in the industry. We are committed to providing excellent customer service and quality products.
FEATURES
- NEMA 4 WEATHER RESISTANT CASE
- INTERNAL HEATER
- TOP MOUNTED ANTENNA
- 4 PROGRAMMABLE CODES (3 ON AND 1 CANCEL)
- TWO PROGRAMMABLE RELAY OUTPUTS
- INTERNAL TEST BUTTONS
- ONE YEAR WARRANTY
OPTIONS
- DTMF DECODER
- PROGRAMMING KIT
SPECIFICATIONS
Standard with the 14UR1 are four two-tone codes, three of which are
activation with the fourth one being the cancel code. Each of the three
programmable codes have timers that can control the output relays. These timers
can be programmed to an on time, off time and the total time, this will allow
the siren to cycle for the specified alert notifications. The relay timers can be programmed anywhere from
5 sec to 21 mins in 5 sec increments. Also the 14UR1 has an internal thermostat
and heater which helps maintain a minimum temperature. Options for the Siren
Controller include a DTMF decoder and a programming kit. The programming kit
allows you to set the tone frequencies, and relay times. Each programming kit
includes software and a cable.
Receiver
Frequency Range: 148-174MHz 440-470MHz
Frequency Stability: 5.0 ppm 2.5 ppm
Sensitivity: 12 dB SINAD 28uV .35uV
Intermodulation: 65dB 65dB
Spurious Response: 70dB 70dB
Selectivity: >50dB @ 12.5KHz >60dB @ 25 KHz
Antenna Impedance: 50 W
General
Enclosure: NEMA 4X/6P Fiberglass
Size: 13.5" x 10" x 5.25"
Weight: 8 lbs.
Temperature: -25 degrees F to +140 degrees F
Input Voltage: 85 - 265 VAC : 1 Amp , 110 - 330 VDC : 1 Amp
Thermostat Heater: 86 degrees F
Output Relays: 2 SPDT, 12 AGW Max. , 10 Amp @ 250VAC
Antenna: 1/4 Wave - Top Mount
Decoder
Functions: 3 on codes , 1 cancel code
Each on code may be programmed for steady on or
cycle on/off. Each code may control relay 1, relay 2 or both.
Timing: On/Off Cycle Duration: 5 sec. to 21 min. in 5 sec. increments.
Total Duration: 5 sec. to 21 min. in 5 sec. increments.
Two-tone: Frequency Range: 300 to 3000Hz
Tone Timing: 1 sec. / 1 sec. , 1 sec. / 3 sec.
DTMF (optional): Digit Length: 1 to 14 digits
Inter-Digit Timeout: 200ms to 12 sec.
|